3M- DP8005 Structural Plastic Adhesive

3M™ Scotch-Weld™ Structural Plastic Adhesive DP8005 is a two-part acylic-based adhesive. 10:1 mix ratio, 3 minute work life and handling strength in approximately 3 hours. 3M™ Scotch-Weld™ EPX™ Plus II applicator and mix nozzles are required (not included).

• 3 minute work life
• Structurally bonds polyolefins without surface treatment
• Medium viscosity

Applications: Shroud Attachment
Brand: Scotch-Weld
Chemical Base: Acrylic
Color: Black, Translucent
Consumer Label: No
Full Cure: 8-24 Hours @ 72 F (22 C)
Hardness: 60 Shore D
Industries: Transportation, Specialty Vehicle, Construction, Automotive, Military & Government, General Industrial, Electronics, Consumer Goods
Mix Ratio Volume Base:Accelerator: 10 : 1, 9.16 : 1
Peel Strength at 72 Degrees F (22 Degrees C): 17 lb/in
Physical Form: Flowable Liquid
Product Form: Each, Cartridge
Shear Strength at 72 Degrees F (22 Degrees C): 2400 Pound-Force Per Square Inch
Shelf Life: 6 months
Specific Gravity: 0.99
Storage Temperature: 40 Degree Fahrenheit
Substrate 1: Plastics (High Performance Nylon), Plastics (ABS, PVC, Acrylic), Metal, Plastics (Polyolefins and Thermoplastic Elastomers), Glass & Ceramics, Wood & Hardboard
Time to Handling Strength: 3 Hour
Type: Structural Adhesive, Structural Plastic Adhesive
Viscosity Range (cps) at Room Temperature: 30,000-50,000, 25,000
Worklife: 3 minutes @ 72 F (22 C)

*Actual product colours may vary from on-screen and printed representations.