DP-100 NS Scotchweld

3M™ Scotch-Weld™ Epoxy Adhesive DP100NS is a non-sag, two-part epoxy adhesive. 1:1 mix ratio, 3-5 minute work life and handling strength in approximately 20 minutes. 3M™ Scotch-Weld™ EPX™ Plus II applicator and mix nozzles are required (not included).

• 1.6 fl oz Duo-Pack
• 5 minute worklife
• Non-sag
• Translucent
• General industrial, sporting goods, solar energy, wind energy, composites, electronics, military, transportation and aerospace
• Bonding, joining, gluing, attaching, assembling, encapsulating, potting and sealing.

Application: Hard Disk Drive Component Assembly
Brand: Scotch-Weld
Chemical Base: Epoxy
Color: Translucent
Consumer Label: No
Container Volume: 50 Millilitre
Full Cure: 24-48 hours @ 72 F (22 C)
Hardness: 87 Shore D
Industry - Use: Construction, Consumer Goods, Electronics, General Industrial, Military & Government, MRO, Specialty Vehicle, Transportation
Mix Ratio Volume Base: Accelerator: 1 : 1
Peel Strength at 72 Degrees F (22 Degrees C): 2 Pound Per Inch (Of Width)
Physical Form: Flowable Liquid
Product Form: Kit
Shear Strength at 72 Degrees F (22 Degrees C): 1500 Pound-Force Per Square Inch
Shelf Life: 15 Month
Specific Gravity: 1.15
Storage Temperature: 72 Degree Fahrenheit
Substrate 1: Glass & Ceramics, Metal, Wood & Hardboard
Substrate 2: Glass & Ceramics, Metal, Wood & Hardboard
Time to Handling Strength: 20 Minute
Type: Epoxy Adhesive
Viscosity Range (cps) at Room Temperature: 95,000
Worklife: 5 minutes @ 72 F (22 C)

*Actual product colours may vary from on-screen and printed representations.