3M- DP460 Epoxy Adhesives

3M™ Scotch-Weld™ Epoxy Adhesive DP460 is a toughened, two-part epoxy adhesive. 2:1 mix ratio, 60 minute work life and handling strength in approximately 4 hours. 3M™ Scotch-Weld™ EPX™ Plus II applicator and mix nozzles are required for dispensing (not included).

• 60 minute worklife
• Toughened for impact resistance
• High peel and shear strength

Applications: Hard Disk Drive Component Assembly
Brand: Scotch-Weld
CA Metalworking Solutions Level 1: Other Assembly Solutions
Chemical Base: Epoxy
Color: Off-White
Consumer Label: No
Container Volume: 200 ml, 37 ml, 400 ml
Full Cure: 48 Hours @ 72 F (22 C)
Hardness: 75-80 Shore D, 78-84 Shore D
IBG CA Metalworking Product Level 1: Industrial Adhesives & Tapes
IBG CA Metalworking Product Level 2: Structural Adhesives
Industries: Transportation, Specialty Vehicle, Construction, Military & Government, General Industrial, MRO, Electronics, Consumer Goods
Mix Ratio Volume Base:Accelerator: 2 : 1
Net Weight: 18.1
Peel Strength at 72 Degrees F (22 Degrees C): 60 lb/in
Physical Form: Flowable Liquid
Product Form: Each
Shear Strength at 72 Degrees F (22 Degrees C): 4650 Pound-Force Per Square Inch, 4500 Pound-Force Per Square Inch
Shelf Life: 15 Months
Specific Gravity: 1.12
Storage Temperature: 72 Degree Fahrenheit
Substrate 1: Metal, Glass & Ceramics
Substrate 2: Metal, Glass & Ceramics
Substrates: Metal, Wood, Glass, Ceramic
Time to Handling Strength: 4 Hour
Type: Epoxy Adhesive
Viscosity Range (cps) at Room Temperature: 30,000, 125,000
Worklife: 60 minutes @ 72 F (22 C)

*Actual product colours may vary from on-screen and printed representations.