Dow Corning- 1-2620 Low Voc Coating

Dow Corning™ 1-2620 Low VOC Conformal Coating. One-part, transparent low viscosity conformal coating with firm, abrasion resistant surface after cure. Low VOC version of Dow Corning™ 1-2620 Dispersion.

• Cures to tough, resilient, abrasion resistant surface
• Solvent-borne resin coating with lower odor
• Reduced VOC content as measured by certain U.S. state standards
• Room temperature cure
• UV indicator for inspection
• UL-94 V-0 flammability rating
• UL-746E Recognized
• IPC-CC-830 Qualified
• Mil-I-46058C Approved
• Low viscosity enhances flow and fill in narrow gaps and spaces
• No ovens required for cure
• Optional mild heat acceleration (after solvent flash-off) can speed in-line processing
• Good adhesion allows use with many low-solids (no clean) and no-lead solders
• May simplify VOC emissions recovery in some U.S. States
• UV indicator allows for automated inspection
• Can be good choice for applications requiring increased toughness and abrasion resistance after cure

Color: Clear
Dielectric Constant at 100 Hz: 2.49
Dielectric Constant at 100 kHz: 2.48
Dielectric Strength: 400 volts per mil v/mil
Dielectric Strength (kV/mm): 16 kV/mm
Durometer - Shore A: 80 Shore A
Flowable
Volume Resistivity: 1.05e+015 ohm-centimeters
Material Safety Data Sheet (MSDS): Click Here
Technical Data Sheet: Click Here

*Actual product colours may vary from on-screen and printer representations.