DP-805-Acrylic Adhesive

3M™ Scotch-Weld™ Acrylic Adhesive DP805 is a two-part MMA-based adhesive. 1:1 mix ratio, 3 minute work life and handling strength in approximately 10 minutes. 3M™ Scotch-Weld™ EPX™ Plus II Applicator and mix nozzles are required (not included).

• 3 minute work life
• Minimal surface prep
• Fast strength build up

Brand: Scotch-Weld
Chemical Base: Acrylic
Color: Off-White
Consumer Label: No
Container Volume: 47 ml
Full Cure: 8-24 Hours @ 72 F (22 C)
Hardness: 79 Shore D
Industries: Transportation, Specialty Vehicle, Metalworking, Construction, Signage, General Industrial, Electronics, Consumer Goods
Mix Ratio Volume Base:Accelerator: 1 : 01
Peel Strength at 72 Degrees F (22 Degrees C): 35 lb/in
Physical Form: Flowable Liquid
Product Form: Each
Shear Strength at 72 Degrees F (22 Degrees C): 3500 Pound-Force Per Square Inch
Shelf Life: 9 Months
Specific Gravity: 0.99
Storage Temperature: 72 Degree Fahrenheit
Substrate 1: Plastics (High Performance Nylon), Plastics (ABS, PVC, Acrylic), Metal, Glass & Ceramics, Wood & Hardboard
Time to Handling Strength: 10 Minute
Type: Acrylic Adhesive
Viscosity Range (cps) at Room Temperature: 110,000
Worklife: 3 minutes @ 72 F (22 C)

*Actual product colours may vary from on-screen and printed representations.