Headlines

Exciting New Dow Corning Products!

Tuesday, May 26, 2015

Paisley Products is excited to announce that we will be introducing four new Dow Corning products this month: EI-1184 Optical Encapsulant, CC-2571 Conformal Coating,

Paisley Products is excited to announce that we will be introducing four new Dow Corning products this month: EI-1184 Optical Encapsulant, CC-2571 Conformal Coating, CC-2570 Conformal Coating and EA-4600 Silicone Hot Melt Adhesive. Continue reading for more information on these new innovative products.

Dow Corning® EI-1184 Optical Encapsulant

Clear, 1:1 mix ratio, fast curing, 2-part silicone encapsulant
Dow Corning® EI-1184 Optical Encapsulant is a 1:1 mix ratio, fast curing, 2-part silicone encapsulant suitable for encapsulating rigid and flexible circuit boards indoor and outdoor LED Lighting applications.

High transparency for improved efficiency
Reduced yellowing for longer device lifetime
Meets industry standards – UL 94, UL 746C (f1), RTI 150°C
1:1 mix ratio for improved manufacturability
Room temperature and heat cure
Rapid, versatile cure processing controlled by temperature

Available Size: 1kg Kit

Technical Data Sheet (TDS): Click Here
Material Safety Data Sheet (MSDS): Click Here

Dow Corning® CC-2570 Conformal Coating

One-part, transparent medium viscosity conformal coating without UV dye.
Dow Corning® CC-2570 Conformal Coating is a one-part, transparent medium viscosity conformal coating without UV dye. Dow Corning® brand RTV conformal coatings have firm, dry surfaces for better handling and abrasion resistance after cure. Various viscosity versions facilitate different application methods. They require atmospheric moisture to cure (no ovens) and their cure rates can be accelerated by mild heat.

Transparent with all visible wavelengths
No UV dye so eliminating fluorescence in the presence of UV energy
Cures to a tough, elastoplastic, resilient, abrasion resistant surface
Solvent-borne resin coating
Room temp cure with optional heat acceleration after solvent flash-off
Mild heat acceleration (after solvent flash-off) can speed in-line processing
Good adhesion allows use with many low-solids (no clean) and no-lead solders

Available Size: 3.6kg Can and 18.1kg Pail

Technical Data Sheet (TDS): Click Here
Material Safety Data Sheet (MSDS): Click Here

Dow Corning® CC-2571 Conformal Coating

One-part, transparent low viscosity conformal coating without UV dye.
Dow Corning® CC-2571 Conformal Coating is a one-part, transparent low viscosity conformal coating without UV dye. Dow Corning® brand RTV conformal coatings have firm, dry surfaces for better handling and abrasion resistance after cure. Various viscosity versions facilitate different application methods. They require atmospheric moisture to cure (no ovens) and their cure rates can be accelerated by mild heat.

Transparent with all visible wavelengths
No UV dye so eliminating fluorescence in the presence of UV energy
Cures to a tough, elastoplastic, resilient, abrasion resistant surface
Solvent-borne resin coating
Room temp cure with optional heat acceleration after solvent flash-off
Mild heat acceleration (after solvent flash-off) can speed in-line processing
Good adhesion allows use with many low-solids (no clean) and no-lead solders

Available Size: 3.6kg Can and 18.1kg Pail

Technical Data Sheet (TDS): Click Here
Material Safety Data Sheet (MSDS): Click Here

Dow Corning® EA-4600 HM RTV Black UV

Reactive silicone hot-melt adhesive for electronic assembly applications.
Dow Corning EA-4600 HM RTV Black UV adhesive is a moisture curing silicone adhesive formulated to have immediate green strength to offer assembly improvements. Products made with this adhesive can be immediately handled. As a viscoelastic material when cured and then exposed to high temperatures, this product will soften but recovers to its typical properties when cooled down.

Instant green strength
Neutral cure RTV adhesive
Allows for UV inspection of adhesive bead for quality control
UL 94 Rated
Primerless adhesion to most common substrates including plastics and metals
Long open time and pot life
Service temperatures from -50 to 300°F (-45 to 150°C)
Can be used with standard hot melt dispensing equipment

Available Size: 30g Tube (10/ctn)

Technical Data Sheet (TDS): Click Here
Material Safety Data Sheet (MSDS): Click Here